服務熱線:
400-879-1999
聯系我們
服務熱線
400-879-1999
電話:400-879-1999
地址:山東省萊州市206國道與308省道交叉口東南50米
當前位置:首頁 > 產品中心 > 平口攪拌車 > 4方平口攪拌車
4方平口攪拌車
來源:http://www.wtiqradio.com發布日期:2021-03-22   瀏覽量:
 
產品視頻
啟動前,應將攪拌操縱桿放在“空檔”位置。
6、 Before starting, put the mixing control lever in the "neutral" position.
七、搞好文明施工,桶內多余材料不準隨便亂倒。卸料后必須對攪拌筒、料槽、托輥等部位進行清洗。
7、 Do a good job in civilized construction, and do not dump the surplus materials in the barrel. After discharging, the mixing drum, material trough, idler and other parts must be cleaned.
八、啟動前應對機械系統各部位認真進行檢查,確認良好后方可啟動。
8、 Before starting, all parts of the mechanical system should be carefully checked, and the machine can be started only after it is confirmed to be in good condition.
五、
3.5方平頭攪拌車的液壓馬達是把液體的壓力能轉換為機械能的裝置。 那液壓馬達有哪些特點呢?
The hydraulic motor of 3.5 square flat head mixer is a device that converts the pressure energy of liquid into mechanical energy. What are the characteristics of the hydraulic motor?
(1)液壓泵在結構上需保證具有自吸能力,而液壓馬達就沒有這一要求。
(1) The structure of the hydraulic pump needs to ensure that it has self-priming capacity, but the hydraulic motor does not have this requirement.
(2)葉片泵依靠葉片跟轉子一起高速旋轉而產生的離心力使葉片始終貼緊定子的內表面,起封油作用,形成工作容積。若將其當馬達用,必須在液壓馬達的葉片根部裝上彈簧,以保證葉片始終貼緊定子內表面,以便馬達能正常起動。
(2) The vane pump relies on the centrifugal force generated by the high-speed rotation of the vane and the rotor, which makes the vane always close to the inner surface of the stator, plays the role of sealing oil, and forms the working volume. If it is used as a motor, a spring must be installed at the root of the blade of the hydraulic motor to ensure that the blade is always close to the inner surface of the stator, so that the motor can start normally.
(3)液壓馬達要求能在很寬的轉速范圍內正常工作,因此,應采用液動軸承或靜壓軸承。因為當馬達速度很低時,若采用動壓軸承,就不易形成潤滑滑膜。
(3) Hydraulic motor is required to work normally in a wide speed range, so hydraulic bearing or hydrostatic bearing should be used. Because when the motor speed is very low, if the use of dynamic bearing, it is not easy to form lubricating film.
(4)為了減小吸油阻力,減小徑向力,一般液壓泵的吸油口比出油口的尺寸大。而液壓馬達低壓腔的壓力稍高于大氣壓力,所以沒有上述要求。
(4) In order to reduce the suction resistance and radial force, the suction port of hydraulic pump is larger than the outlet port. The pressure of the low pressure chamber of the hydraulic motor is slightly higher than the atmospheric pressure, so there is no such requirement.
(5)液壓馬達一般需要正反轉,所以在內部結構上應具有對稱性,而液壓泵一般是單方向旋轉的,沒有這一要求。
(5) The hydraulic motor generally needs forward and reverse rotation, so it should have symmetry in the internal structure, while the hydraulic pump generally rotates in one direction, so there is no such requirement.
(6)液壓馬達必須具有較大的起動扭矩。由于液壓馬達與液壓泵具有上述不同的特點,使得很多類型的液壓馬達和液壓泵不能互逆使用。
(6) The hydraulic motor must have a large starting torque. Due to the above different characteristics of hydraulic motor and hydraulic pump, many types of hydraulic motor and hydraulic pump can not be used in reverse.
六、選配
Optional
高壓水泵沖洗車輛、自動潤滑、電子秤、鏟斗振動器、水泥料斗。
High pressure water pump washing vehicle, automatic lubrication, electronic scale, bucket vibrator, cement hopper.
攪拌和卸載
Mixing and unloading
雙錐形滾筒擁有雙螺旋形攪拌螺桿和中凸底部。
The biconical drum has a double spiral stirring screw and a convex bottom.
滾筒幾何容量:.................... 5000L
Geometric capacity of drum: 5000L
滾筒旋轉速度:..................20轉/分鐘.
Drum rotation speed: 20 rpm
混凝土產量:.................3.2立方米/罐
Concrete output: 3.2m3/can
“重型”球形鞍座上安裝的反力架可以180°液壓旋轉,并且通過液壓式制動器自動鎖止。滾旋轉通過柱塞泵和閉路中的柱塞液壓馬達實現,在操作室內和攪拌機后部擁有手動電氣閥。
The reaction frame installed on the "heavy" spherical saddle can rotate 180 ° hydraulically and lock automatically by hydraulic brake. The rotation of the drum is realized by the plunger pump and the plunger hydraulic motor in the closed circuit. There are manual electric valves in the operation room and at the rear of the mixer.
可拆卸溜槽可以保證直接通過料斗卸載。作為標準配置提供1個溜槽延長部件。
The detachable chute can ensure direct unloading through the hopper. A chute extension is provided as standard.
設備液壓系統
Equipment hydraulic system
齒輪泵:雙聯齒輪泵
Gear pump: double gear pump
最大流量:.................... 90升/分鐘。
Maximum flow rate: 90 L / min.
最大壓力:........................ 27.5MPa兆帕,
Maximum pressure: 27.5mpa, MPa,
馬達:品牌/ 美國桑尼
Motor: brand / Sonny
3件手柄多功能操縱桿。
Three handle multi-function control lever.
鋁質熱交換器,用于冷卻液壓油。
Aluminum heat exchanger for cooling hydraulic oil.
半閉式進油,可以從外部更換液壓油過濾器。
Semi closed oil inlet, hydraulic oil filter can be changed from outside.
裝載
load
裝載臂配置自動稱量感應儀,雙作用裝載裝置舉升和復位油缸,手動控制的進料口擁有標準的提示功能。
The loading arm is equipped with automatic weighing sensor, double acting loading device, lifting and reset oil cylinder, and the manually controlled feeding port has standard prompt function.
容量:.............................. 700升
Capacity: 700 liters
每次裝滿需要的裝載次數:.......... 大約5次
Loading times required for each filling:...... about 5 times
操作室
Operation room
封閉的操作室擁有制熱/冷系統,傾斜式前窗。
The enclosed operating room has heating / cooling system and inclined front window.
人性化座椅,配置柔性懸架和高度調整功能,配電子稱重、行車影像。
Humanized seat, equipped with flexible suspension and height adjustment function, with electronic weighing and driving image.
維護加注量
Maintenance filling quantity
燃油箱: ............................. 75升
Fuel tank: 75 L
液壓系統總容量:........................ 75升
Total capacity of hydraulic system: 75 L
機油:........................... 16升
Oil: 16L
重量
weight
操作重量:......................8050千克
Operating weight: 8050kg
最大總重量:....................15250千克
Maximum total weight: 15250kg
最大載重量:.....................8400千克
Maximum load capacity: 8400kg
尺寸
size
長×寬×高:....................7730×2700×3260 mm
Length × width × height: 7730 × 2700 × 3260 mm
  • 上一篇:1.2平口攪拌車
  • 下一篇:5.5方平口攪拌車
  • 相關產品
    3.5平口攪拌車

    3.5平口攪拌車

    2.6方平口攪拌車

    2.6方平口攪拌車

    1.8方平口攪拌車

    1.8方平口攪拌車

    2方平口攪拌車

    2方平口攪拌車

    ?

    萊州中科聚峰機械有限公司
    電話:15053524111 地址:山東省萊州市206國道與308省道交叉口東南50米
    聚峰機械專注生產銷售混凝土全自動攪拌車,小型混凝土自動攪拌車,自進料混凝土攪拌車,平口攪拌車,廠家直銷,型號齊全,經久耐用,質優價廉;以規范的管理為依托,以專業的技術為支持,安全可靠,讓您放心選擇!

    日本无吗无卡v免费清高清