服務熱線:
400-879-1999
聯系我們
服務熱線
400-879-1999
電話:400-879-1999
地址:山東省萊州市206國道與308省道交叉口東南50米
當前位置:首頁 > 攪拌車資訊 > 新聞資訊 > 自動上料攪拌車無法正常啟動是怎么回事
自動上料攪拌車無法正常啟動是怎么回事
來源:http://www.wtiqradio.com發布日期:2020-06-15   瀏覽量:
 
自動上料攪拌車使用方便,不受場地限制,是目前非常受歡迎的一類攪拌車。
The automatic loading mixer is convenient to use, not limited by the site, and is a very popular type of mixer at present.
在移動式混凝土攪拌車使用中也會遇到一些問題,例如無法啟動,這是怎么回事呢?我們分析原因由以下幾點:
There are also some problems in the use of mobile concrete mixer, such as unable to start, what's the matter? The reasons are as follows:
一、如果在移動式自動上料攪拌車啟動時只聽到啟動機電磁開關發出“咯咯”聲,但曲軸卻不轉動。這種情況有可能是蓄電池“斷格”造成的。
1、 If only the electromagnetic switch of the starter makes a "cluck" sound when the mobile automatic feeding mixer starts, but the crankshaft does not rotate. This may be caused by the battery "broken grid".
二、如果極樁、極樁夾子接觸不良而發熱燒損,這時啟動移動式自動上料攪拌車就會出現突然轉動無力,并伴有燒橡膠氣味或蓄電池處冒煙現象。
2、 If the pole pole and pole pole clamp are not in good contact and are heated and burned, the mobile automatic feeding mixer will suddenly turn powerless, accompanied by burning rubber smell or smoke at the battery.
三、自動上料攪拌車蓄電池自放電嚴重,其極板、隔板嚴重老化時,就會出現臨時停車每次都能啟動,但停車時間較長或第二天啟動時卻只能使曲軸轉一下。那個時候您可以考慮更換蓄電池。
3、 When the battery of the automatic charging mixer is discharged seriously and its plates and partitions are aged seriously, it will appear that the temporary stop can start every time, but the stop time is long or the crank can only be turned once the next day. At that time, you can consider replacing the battery.
四、如果自動上料攪拌車啟動時只有輕微“嗒”的一聲,之后就再沒有任何反應時,就可以是啟動繼電器發卡出了問題。
4、 If there is only a slight "click" when the automatic feeding mixer starts, and there is no response after that, it can be that the starting relay is jammed.
五、當自動上料攪拌車飛輪齒圈的嚙合切入面變形的時候,就會出現啟動時啟動機驅動齒輪與發動機飛輪齒圈會發出撞擊的空轉聲。
5、 When the meshing cut-in surface of the flywheel ring gear of the automatic feeding mixer is deformed, there will be a idling sound of impact between the driving gear of the starter and the flywheel ring gear of the engine when starting.
六、當啟動機電磁開關的保持線圈錯接在了電源接線柱上或鑰匙開關上的3根線接錯時,電源總開關一接通,就會出現自動上料攪拌車啟動機驅動齒輪就和飛輪齒圈嚙合在一起轉動的現象。
6、 When the holding coil of the electromagnetic switch of the starting machine is wrongly connected to the power terminal or the three wires on the key switch are wrongly connected, as soon as the main power switch is turned on, there will be a phenomenon that the driving gear of the starting machine of the automatic feeding mixer engages with the flywheel ring gear to rotate together.
自動上料攪拌車無法啟動常有以上幾個方面的原因,大家可以根據現象進行排查。
There are several reasons why the automatic feeding mixer can not be started. You can check according to the phenomenon.
中科聚峰為您分析的關于攪拌車無法啟動的原因由以上幾條,希望我們的介紹對您有所幫助,更多詳情資訊請繼續關注我們網站http://www.wtiqradio.com
The reason why the mixer can't be started analyzed by Zhongke Jufeng for you is from the above several points. I hope our introduction can help you. For more details, please continue to follow our website.http://www.wtiqradio.com
?

萊州中科聚峰機械有限公司
電話:15053524111 地址:山東省萊州市206國道與308省道交叉口東南50米
聚峰機械專注生產銷售混凝土全自動攪拌車,小型混凝土自動攪拌車,自進料混凝土攪拌車,平口攪拌車,廠家直銷,型號齊全,經久耐用,質優價廉;以規范的管理為依托,以專業的技術為支持,安全可靠,讓您放心選擇!

日本无吗无卡v免费清高清