服務熱線:
400-879-1999
聯系我們
服務熱線
400-879-1999
電話:400-879-1999
地址:山東省萊州市206國道與308省道交叉口東南50米
當前位置:首頁 > 攪拌車資訊 > 新聞資訊 > 中科攪拌車常見問題解決方法?
中科攪拌車常見問題解決方法?
來源:http://www.wtiqradio.com發布日期:2020-07-29   瀏覽量:
 
一、攪拌車拖輪是干什么的?
1、 What is a mixer tug for?
攪拌車拖輪是個軸承,用于把罐體支撐起來,與攪拌車是一體的,輔助攪拌。
The mixer tugboat is a bearing, which is used to support the tank and is integrated with the mixer to assist mixing.
二、攪拌車液壓泵怎么換油?
2、 How to change oil for hydraulic pump of mixer truck?
一般不建議自己換,直接到售后點找人員更換,而且使用的油必須符合要求,不然對設備損害很大,使用壽命也會大大縮短,更換合理標號的液壓油。
Generally, it is not recommended to replace it by yourself, but go directly to the after-sales point for professional replacement. Moreover, the oil used must meet the requirements. Otherwise, the equipment will be greatly damaged and the service life will be greatly shortened. Replace the hydraulic oil with reasonable label.
三、攪拌車罐體填充率跟罐體傾角有什么關系?
3、 What is the relationship between tank filling rate and tank inclination angle?
目前攪拌車傾角在12度左右,填充率為63%左右,傾角不好測量,填充率也很難計算。目前銷售的攪拌車都以有效攪拌容積為準。
At present, the inclination angle of the mixer truck is about 12 degrees, and the filling rate is about 63%. It is difficult to measure the inclination angle and calculate the filling rate. At present, all the mixers sold are based on the effective mixing volume.
四、混凝土攪拌車罐不轉,轉開了沒力而液壓油從郵箱加油口噴出來是什么原因?
4、 What is the reason why the tank of the concrete mixer doesn't rotate and the hydraulic oil sprays out from the oil port of the mailbox?
中科攪拌車
液壓一個進一個回,進沒力可能是油泵封閉部分壞了?;赜蜎_,可能是油泵封閉腳墊壞了。
The hydraulic pressure enters and returns one by one. The inlet force may be due to the broken sealing part of the oil pump. Return oil flush, maybe the oil pump sealing foot pad is broken.
五、攪拌車攪拌筒的轉速是多少?
5、 What is the rotational speed of mixer drum?
進料時攪拌筒的轉速是:6---10轉/分;攪拌時攪拌筒的轉速:6--10轉/分。
The rotating speed of the mixing drum during feeding is 6-10 rpm, and that of the mixing drum during mixing is 6-10 rpm.
六、8--12方的混凝土攪拌車進料口到地面距離是多少?
6、 What is the distance between the feeding port and the ground of 8-12 cubic meters concrete mixer truck?
一般8--12方的攪拌車整車高度大概在3.8米左右,進料口距離地面就有3.5米左右,具體的根據不同的車型來定。
Generally, the vehicle height of 8-12 cubic meters mixer is about 3.8 meters, and the distance between the feed inlet and the ground is about 3.5 meters, which is determined according to different models.
七、水泥攪拌車怎么清洗罐?
7、 How to clean the tank of cement mixer?
      攪拌車配的水箱,每次卸完料后就應該將水放入罐內,在返回時攪拌行使,到攪拌站后再將水排出接料。罐體外表應該在水箱加水時即可順便清洗。當然也可以直接用水箱內的水清洗。如果水泥漿已經凝固,罐體內找的清罐,外表凝固用草酸刷洗就行了。
The water tank equipped with the mixer truck should put the water into the tank after unloading each time. When returning to the mixing station, the water should be discharged to receive materials. The surface of the tank should be cleaned when the water tank is filled with water. Of course, it can also be directly cleaned with water in the water tank. If the cement slurry has solidified, find a professional cleaning tank inside the tank, and brush the surface with oxalic acid.
?

萊州中科聚峰機械有限公司
電話:15053524111 地址:山東省萊州市206國道與308省道交叉口東南50米
聚峰機械專注生產銷售混凝土全自動攪拌車,小型混凝土自動攪拌車,自進料混凝土攪拌車,平口攪拌車,廠家直銷,型號齊全,經久耐用,質優價廉;以規范的管理為依托,以專業的技術為支持,安全可靠,讓您放心選擇!

日本无吗无卡v免费清高清